Large Modern Wire Garden Trellis, Classic Trellises, up to 10ft high

For the more Modern, Minimalist Gardener, this Simple, Clean Design, Sturdy Built, with 1" aluminum frame and stainless steel wires. 
-Many large sizes are available. 
-All handcrafted in the USA, all aluminum. This trellis will never rust. 
-Made from 1"(frame) and 1/2" (connection between trellis panels) square aluminum tubing. 
-All welded frame construction. Finishes are Powder Coated for years of maintenance free beauty.
 
LARGE SIZES: Each trellis in the following sizes is built in 2 equal length panels which assemble easily with 4 screws on each side. 
Assembly is required.
Sizes:
4’ x 4’ Square
5’ high x 3’ wide - Vertical
3’ high x 5’ wide - Horizontal
5’ high x 4’ wide - Vertical
4’ high x 5’ wide - Horizontal
5’ x 5’ - Square
6’ high x 3’ wide - Vertical
6’ high x 4’ wide - Vertical
7’ high x 3’ wide - Vertical
8’ high x 3’ wide - Vertical
9’ high x 3’ wide - Vertical 
 
JUMBO SIZES: Each trellis in the following sizes is built in 3 equal length panels which assemble easily with  8 screws on each side. 
Assembly is required.
ALL VERTICAL SIZES - 
6’ high x 5’ wide
7’ high x 4’ wide
7’ high x 5’ wide
8’ high x 4’ wide
9’ high x 4’ wide
10’ high x 3’ wide
11’ high x 3’ wide
12’ high x 3’ wide
 
ADDITIONAL JUMBO SIZES: Each trellis in the following sizes is built in 4 equal length panels which assemble easily with 12 screws on each side. 
Assembly is required.
ALL VERTICAL SIZES - 
8’ high x 5’ wide
9’ high x 5’ wide
 
Each Trellis comes with one of these options - choose your option at checkout:
1) Wall Mounts (4-6 included, depending on size) - 2.5” distance from wall to back of trellis 
2) 8" Stakes
3) 12" Stakes
4) 8" Stakes + 2 Wall Mounts*
5) 12" Stakes + 2 Wall Mounts*
*for extra upright support against wall
 
+ Additional sizes
*Check our shop for other trellises (larger and smaller) or contact us for custom sizes.
 
WIRE TIGHTENING HELPFUL HINT: The wires will not be “guitar string” tight. If you over-tighten: Due to the strength of the wires, the number of steel wires that are in the trellis apply enough force that the frame will pull in just slightly. When tightened evenly and not over-tightened, the wires will be taut, but not as tight as what you might find on a stainless steel railing. Over-tightening 2 or 3 wires will cause others to get slightly slack. If this happens, just slightly loosen the over-tightened wires.
 
TRELLIS ONLY, PLANTERS, PLANTS, ETC. ARE NOT INCLUDED.
​
+ Additional sizes
*Contact us for larger or custom sizes.
 
Offered in a variety of colors: Bronze, Black, White, Hunter Green, Copper Vein, Hammered Pewter, Silver Vein, Mill Finish (no finish, bare aluminum, silver tone), Patina Copper Color. Other colors on request. 
​
The stakes that are pushed into the ground come in two sizes for different hardness of ground. For example, if your ground is extremely hard, 8" stakes should offer enough support, and may be best due to the difficulty of getting stakes further into the ground. Softer ground or larger trellises might require the longer 12" stakes.  
​
Tools needed for assembly:
A phillips head screwdriver or hand drill is required to attach the stakes to the Trellis and to assemble the trellis. For wall mounted trellises, a hand drill is needed for attaching the wall mounts to the trellis and to attach the wall mounts to the wall surface. In some cases, a hammer drill may be needed. Such instances may be for brick or cement walls. Screws to attach trellis to wall are not included due to the wide variation in wall surfaces. Screws for attaching trellis to wall mounts are included. All other assembly hardware and screws are included.